Robe Robin MMX Spot Wireless DMX CRMX Especificaciones descargar pdf (Pagina 14)

Ethernet / DMX operation

Options “Art2DMX” has to be selected from the “Ethernet Mode” menu on the rst xture (connected to the

Ethernet) in the xture chain,next xtures have standard DMX setting.

Connect the Ethernet-input of the rst xture in the data chain with the network. Connect the DMX output of

this xture with the input of the next xture until all xtures are connected to the DMX chain.

Caution: At the last xture, the DMX chain has to be terminated with a terminator. Solder a 120 Ω resistor

between Signal (–) and Signal (+) into a XLR-plug and connect it in the DMX-output of the last xture.

Example:

DMX address=1 DMX address=39 DMX address=150

IP addres=002.168.002.002

Universe=0

DMX address=1 DMX address=39 DMX address=150

IP addres=002.168.002.003

Universe=1

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 48 49

Sin comentarios

Robe Robin MMX Spot Wireless DMX CRMX Especificaciones Pagina 14