Robe ROBIN Pointe Especificaciones descargar pdf (Pagina 15)

Ethernet / DMX operation

Option “ Artnet" (gMaI or gMA2 or sACN) has to be selected from “Ethernet Mode” menu at rst xture.

Option “Ethernet To DMX” has to be selected from the “Ethernet Mode” menu at the rst xture (connected to

the Ethernet) in the xture chain, next xtures have standard DMX setting.

Connect the Ethernet-input of the rst xture in the data chain with the network. Connect the DMX output of

this xture with the input of the next xture until all xtures are connected to the DMX chain.

Caution: At the last xture, the DMX chain has to be terminated with a terminator. Solder a 120 Ω resistor

between Signal (–) and Signal (+) into a XLR-plug and connect it in the DMX-output of the last xture.

DMX address=1 DMX address=24 DMX address=129

IP addres=002.168.002.002

Universe=0

DMX address=1 DMX address=24 DMX address=129

IP addres=002.168.002.003

Universe=1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Sin comentarios

Robe ROBIN Pointe Especificaciones Pagina 15